Major international airports need surfaces that balance high-traffic durability, maintenance, fire performance, weight, repeatability, complex fabrication and long-term replacement. A project normally uses a material mix rather than one surface everywhere: natural marble for premium lobbies and VIP areas; inorganic terrazzo for high-traffic public flooring; Wayon Flexible Stone (MCM Stone) for selected lightweight walls, curved forms and ceilings; zero-silica surfaces for fabricated vanities and service counters; and porcelain slabs for walls, washrooms and furniture surfaces.

Why Dubai Airport Development Matters

 

In September 2026, Dubai Airports reaffirmed that its long-term airport expansion strategy remains unchanged. The planned future hub is designed for capacity of up to 250 million passengers per year, while resilience measures for critical infrastructure are also being considered. For the architectural-material supply chain, airports, aviation-related facilities, commercial areas and associated urban development remain important long-term demand drivers in Dubai.

For surface-material suppliers, the practical opportunity is to enter specification and sampling through architects, main contractors, fit-out contractors, stone contractors, vanity contractors and local fabricators before final procurement.

Material Selection by Airport Area

 

Area	Suggested materials	Procurement focus
Terminal lobby / VIP	Natural marble, inorganic terrazzo	Visual grade, durability, slab selection, continuity
High-traffic public floors	Inorganic terrazzo, natural stone	Wear, maintenance, batch consistency
Curved / feature walls	Wayon Flexible Stone (MCM Stone)	Weight, flexibility, substrate/fixing system
Washrooms / vanities	Zero-silica surfaces, quartz, porcelain	Absorption, fabrication, cleaning, repeatability
Retail / F&B counters	Zero-silica surfaces, quartz, marble	Durability, cut-outs, mitres, repeat production
Lift lobbies / wall finishes	Flexible stone, marble, porcelain	Weight, sizing, installation efficiency
Back-of-house / staff areas	Terrazzo, porcelain, countertop surfaces	Durability, cost, standardisation

 

Key Specifications

Wayon Flexible Stone (MCM Stone)

Item	Data / result
Thickness	2–8 mm
Common sizes	600×1200 / 1200×2400 / 1200×3000 mm
Reaction to fire	A2-s1,d0 (tested 3.0 mm specimen under stated report/end-use conditions)
Flexibility	3 mm specimen bent 180° around a 40 mm mandrel with no cracking
Freeze-thaw	No visible change after 25 cycles
Thermal shock	No visible change after 20 cycles
Thermal conductivity	0.074 W/(m·K)
VCM	Not detected (<0.10 mg/kg)

 

Wayon Inorganic Terrazzo

Item	Typical / reference range
System	Resin-free inorganic system
Reaction to fire	Class A1 non-combustible
Water absorption	0.19–0.53%
Density	2.37–2.49 g/cm³
Compressive strength	101–123 MPa
Dry flexural strength	12.2–14.5 MPa
Mohs hardness	4–6

 

Wayon Zero-Silica Surfaces

Item	Tested data
Crystalline silica	Tested WG486: <1%; quartz and cristobalite not detected; estimated detection limit 0.1%
Water absorption	Average 0.01%
Compressive strength	Dry 197 MPa; wet 203 MPa
Flexural strength	Dry 47.6 MPa; wet 53.3 MPa
Impact resistance	Average 9.05 J
Abrasion resistance	Ha 32.4

 

Comparison Table

Material	Key advantage	Priority airport use	Project consideration
Natural marble	Natural premium appearance	Lobby, VIP, feature areas	Selection, variation, maintenance
Inorganic terrazzo	A1 non-combustible; design flexibility	Public floors, corridors	Match design/report to specification
Flexible Stone	2–8 mm; lightweight and bendable	Walls, curves, selected ceilings	Substrate, fixing and fire system
Zero-Silica Surface	Low absorption; fabricatable	Vanities, service counters	Exact tested product/local rules
Porcelain Slab	Large-format surface applications	Walls, washrooms, furniture	Handling, joints and fabrication

 

Why Airports Need Material + Fabrication + Project Management

Airport packages involve more than standard slabs: cut-to-size pieces, corners, cut-outs, service counters, vanities, special details and phased delivery are common. Wayon Stone can combine material supply with cut-to-size, CNC cut-outs, 45° mitres, countertops, stairs and special fabrication, with Zone/Floor/Area numbering and project packing.

Who Is This Product For?

Buyer / influencer	Typical need	Wayon support
Main Contractor / EPC	Submittals, schedule, risk control	Multi-material supply, documents, phased delivery
Stone Contractor	Slabs + fabrication + replenishment	Cut-to-size, specials, numbered packing
Airport Fit-out Contractor	Floors, walls, feature areas	Material mix, samples, technical documents
Architect / Consultant	Specification and performance	Samples, reports, comparison data
Vanity / Countertop Contractor	Repeat fabricated counters	Slabs + prefabrication
Distributor / Local Fabricator	Local stock and fabrication	Material + technical + long-term supply

 

FAQ

Can Wayon Stone supply multiple materials for airport projects?

Yes. Wayon supplies natural marble, inorganic terrazzo, Wayon Flexible Stone (MCM Stone), quartz/zero-silica surfaces and porcelain slabs for B2B projects, together with fabrication services.

Why consider inorganic terrazzo for airport floors?

High-traffic public areas require durability, maintainability and design consistency. Inorganic terrazzo can be evaluated as a candidate material subject to project specifications and product-specific data.

Can flexible stone be used on airport walls?

It can be evaluated for selected interior walls, curved forms, ceilings and lightweight decorative areas, subject to substrate, fixing method, fire system, tested product and local requirements.

Can zero-silica surfaces be used for airport vanities?

They can be evaluated for fabricated vanities and service counters, subject to the exact tested product, project technical requirements and local regulations.

Can Wayon pack by airport zone?

Project packing can be planned by Zone/Floor/Area together with cut-to-size fabrication and phased shipment, subject to project confirmation.

What is needed for a project quotation?

Send the BOQ, material specification, dimensions, quantities, drawings, technical standards, sample requirements, packing requirements and target delivery schedule.

 

About Wayon Stone

Founded in 1982, Wayon Stone focuses on international B2B project, wholesale and fabrication markets. Its surface portfolio includes quartz stone, zero-silica surfaces, inorganic terrazzo, Wayon Flexible Stone (MCM Stone), natural marble and porcelain slabs, supported by cut-to-size, countertop, CNC cut-out, mitre and special fabrication services.

For airports, hotels, mixed-use developments, public buildings and major infrastructure-related facilities, Wayon can support material selection, samples, technical documentation, project fabrication, numbered packing and phased delivery.